[Thread Ufficiale] DFI DK P45-T2RS Plus

[xbrian88]

---

DFI DK P45-T2RS Plus

CPU

# LGA 775 socket for: - Intel® Core2 Quad and Intel® Core2 Duo
# Supports Intel Enhanced Memory 64 Technology (EMT64T)
# Supports Enhanced Intel SpeedStep Technology (EIST)
# Supports Intel Hyper-Threading Technology
# Supports 1333/1066/800MHz FSB

Chipset

# Intel® chipset - Northbridge: Intel® P45 Express chipset Intel® Fast Memory Access technology - Southbridge: Intel® ICH10R

System Memory

# Four 240-pin DDR2 DIMM sockets
# Supports DDR2 1066MHz (O.C 1200MHz)
# Delivers up to 12.8Gb/s bandwidth
# Supports dual channel (128-bit wide) memory interface
# Supports up to 8GB system memory
# Supports unbuffered x8 and x16 DIMMs

Expansion Slots

# 2 PCI Express (Gen 2) x16 slots - 2-way CrossFire: One slot operating at x16 (16-lane port) or two slots each operating at x8 (8-lane ports) bandwidth
# 2 PCI Express x1 slots
# 2 PCI slots

BIOS

# Award BIOS
# 8Mbit SPI flash BIOS
# CMOS Reloaded

Audio

# Realtek ALC885 High Definition audio CODEC
# 8-channel audio output
# DAC SNR/ADC SNR of 106dB/101dB
# Full-rate lossless content protection technology
# Optical S/PDIF-out and coaxial RCA S/PDIF-out interfaces


LAN

# Marvell 88E8053 PCIE Gigabit LAN controller
# Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards

Storage

# Intel ICH10R chip - Intel Matrix Storage technology - Supports up to 6 SATA devices - SATA speed up to 3Gb/s - RAID 0, RAID 1, RAID 0+1 and RAID 5
# JMicron JMB363 PCI Express to SATA and PATA host controller - Supports up to 2 UltraDMA 100Mbps IDE devices - Supports 2 SATA devices - SATA speed up to 3Gb/s - RAID 0 and RAID 1

Rear Panel I/O

# 1 mini-DIN-6 PS/2 mouse port
# 1 mini-DIN-6 PS/2 keyboard port
# 1 optical S/PDIF-out port
# 1 coaxial RCA S/PDIF-out port
# 6 USB 2.0/1.1 ports
# 1 RJ45 LAN port
# Center/subwoofer, rear R/L and side R/L jacks
# Line-in, line-out (front R/L) and mic-in jacks

Internal I/O

# 3 connectors for 6 additional external USB 2.0 ports
# 1 connector for an external COM port
# 1 front audio connector
# 1 CD-in connector
# 1 IrDA connector
# 8 Serial ATA connectors
# 1 40-pin IDE connector
# 1 floppy connector
# 1 24-pin ATX power connector
# 1 8-pin 12V power connector
# 2 4-pin 5V/12V power connectors (FDD type)
# 1 front panel connector
# 4 fan connectors
# 1 download flash BIOS connector
# 1 diagnostic LED
# EZ touch switches (power switch and reset switch)

Power Management

# Ultimate 4-phase digital PWM with 12 MOSFETs
# ACPI and OS Directed Power Management
# ACPI STR (Suspend to RAM) function
# Wake-On-PS/2 Keyboard/Mouse
# Wake-On-USB Keyboard/Mouse
# Wake-On-LAN
# Wake-On-Ring
# RTC timer to power-on the system
# AC power failure recovery

Hardware Monitor

# Monitors CPU/system/Northbridge temperature and overheat alarm
# Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages
# Monitors the speed of the cooling fans
# CPU Overheat Protection function monitors CPU temperature and fan during system boot-up - automatic shutdown upon system overheat

PCB

# 4 layers, ATX form factor
# 24.5cm (9.64") x 30.5cm (12")

[xbrian88]

Pagina Download Bios Ufficiali

Winflash 1.92 per Flash da Win

Pagina Download Bios Beta

Drivers

P45 Chipset XP/Vista 32/64 21/07/2008

Audio R1.93 XP/Vista 32/64 21/07/2008

LAN 21/07/2008

[xbrian88]

riservato

[xbrian88]

riservato1

[erfass]

a breve posteremo dei risultati con questa mobo

[R @ P T O R]

da oggi ache io sono nel club DFI ..aquistata oggi .. a presto i test....


buon week end a tutti

[xbrian88]

Test OCX

Originalmente inviato da Onepagebook

Well, I don't have to talk too much about this board
since it has been taking most of Super pi 1m WRs
I have the chance to take a look at this "Dark Knight"
so, I will briefly leteveryone have a look here

1.彩盒, DK series usually is all with black box..



2.see that longer CF bridge..?



3.memory ; for the board components , you don't want to think DFI will save some $$ and go cheap,
DK series is merely just not that fancy like UT series without some mos heatsink on top



4.I/O area looks great as well



5. CPU socket area is not Digital PWM ,
but it will still doing great job especially it can get you spi WR



6.it got the screw mounting on the NB



7.The whole board looks like this



8.here we go, I always love to see motherboard got "Debug led" like DFI does,
be sure that that blue jumper cap is not for clearing CMOS action but the top of South bridge with RED.



9.hmm,here we go,rev. A2



10.NB heatsink


now this is what I did with the mod for vcore, thanks Qbella for the info



Bios will be next

Originalmente inviato da Onepagebook

my bios settings for 0812
600fsb stable boot











next, let 's see some 2d then 3d bench mark

Originalmente inviato da Onepagebook

testbed:
Mobo: DFI DK p45, bios 0812
cpu: Intel C2D e8600 820a719
Cooler: Thermalright U120E + Sanyo Denki san ace 120
VGA: ATI 4870 single card
RAM: Team Group ddr800 1gx2
HD: WD Raptor 2 150adfd single drvie


easy 7x600 pi 1m