Vmod Foxconn Mars P35

[xbrian88]

Da Shamino...

Originalmente inviato da Shamino

CPU PLL VMOD

Just near Southbridge if you need more than 1.95v PLL:



You can use pencil or a 10K ohms VR. For 10K ohms VR set at 10k ohms first tune down for more voltage.


MCH GTLRef AKA FSB VRef & VFSB Swing




Beside chipset. Set at Max resistance and tune down to increase voltage. Both voltages are derived from CPU VTT - Default = MCH GTLRef ~ 0.66x VTT, VFSB Swing ~ 0.25x VTT.